|
Approximate Analytic Solutions for Mixed Convection
Heat Transfer from a Shear-Flow Past a Rotating Cylinder |
565-130 |
|
Kenzu Abdella, Felicia Magpantay |
|
|
|
|
|
Couette-Poiseuille Flow of Non-Newtonian Fluids in
Concentric Annuli |
565-220 |
|
Petr Filip |
|
|
|
|
|
Approximate Solutions of Heat Conduction Problems
in Multi-dimensional Cylinder Type Domain by Conservative Averaging
Method, Part 1 |
565-203 |
|
Margarita Buike, Andris Buikis |
|
|
|
|
|
Approximate Solutions of Heat Conduction Problems
in Multi-dimensional Cylinder Type Domain by Conservative Averaging
Method, Part 2 |
565-257 |
|
Andris Buikis, Margarita Buike |
|
|
|
|
|
A Regenerative Multiple Flamelet Model for
non-Premixed Combustion with non-Uniform EGR |
565-270 |
|
Vasileios Hamosfakidis, Arkadiusz Kobiera, Dennis
N. Assanis |
|
|
|
|
|
On the Hydrodynamics of Finite Jets and the
Geometry of Laminar Counterflow Premixed Flames |
565-292 |
|
Siavash H. Sohrab |
|
|
|
|
|
Integral Modeling and Simulation in Some Thermal
Problems |
565-301 |
|
Lechoslaw Hacia, Konrad Domke |
|
|
|
|
|
Efficient Symmetric Boundary Condition for Galerkin
Finite Volume Solution of 3D Temperature Field on Tetrahedral Meshes |
565-360 |
|
Saeed-Reza Sabbagh-Yazdi, Nikos E. Mastorakis |
|
|
|
|
|
Hybrid-Electric Vehicles: Design and Application of
ECSC - an Automotive Energy Savings Device |
565-370 |
|
M. K. Warren, M. G. Rasul |
|
|
|
|
|
Flow Distribution inside an Electrostatic
Precipitator: Effects of Uniform and Variable Porosity of Perforated
Plate |
565-372 |
|
S. M. E. Haque, M. G. Rasul, M. M. K. Khan, A. V.
Deev, N. Subaschandar |
|
|
|
|
|
Development of a Digital Data Base for Power System
of Crete, for Displaying System's Data on Geographical Maps, using GIS
and Web Tools |
565-368 |
|
J. Syllignakis, C. Adamakis, T. M. Papazoglou |
|
|
|
|
|
Modelling and Simulation of the Effects of Passive
Cooling Technologies on Energy Savings for Building Systems in
Subtropical Climate |
565-366 |
|
Ashfaque Ahmed Chowdhury, M. G. Rasul, M. M. K.
Khan |
|
|
|
|
|
The Application of Multivariate Geostatistical
Techniques for the Study of Natural Attenuation Processes of
Chlorinated Compounds |
565-354 |
|
Annamaria Castrignano, Claudia Cherubini, Luca Dima,
Concetta I. Giasi, Fausta Musci |
|
|
|
|
|
Modelling and Simulation of Thermodynamic Processes
of Vertical Shaft Kiln in Magnesia Plant Using CFD Code Fluent |
565-302 |
|
D. Saotayanan, M. G. Rasul |
|
|
|
|
|
Optimization of Heat and Mass Transfer in Capillary
Porous Media during Drying Process |
565-290 |
|
A. Farjad, Sh. Rahrovan, A. K. Haghi |
|
|
|
|
|
Heat Transfer and Fluid Flow through Microchannels
– a Theoretical Approach |
565-289 |
|
N. Amanifard, M. Borji, A. K. Haghi |
|
|
|
|
|
A Numerical Study on Thermal Drying of Moist Porous
Solid |
565-288 |
|
F. Zerafat Angiz, N. Amanifard, A. K. Haghi |
|
|
|
|
|
Comparative Study of Forging Parameters on
Microstructures and Properties between Aluminum Alloys Al6063 and
Al7075 |
565-264 |
|
S. Sopha, S. Nansaarng |
|
|
|
|
|
A Hydrodynamic Model of a Contaminated Fractured
Aquifer |
565-252 |
|
Claudia Cherubini, Vincenzo Francani |
|
|
|
|
|
Influence of Cryogenic Treatment on Microstructure
and Hardness of Austempered Ductile Iron |
565-244 |
|
Dawdi Myszka, Tomasz Borowski, Tomasz Babul |
|
|
|
|
|
A Study of Influence of Parameters of Dissimilar
Materials Joining on Friction Stir Welding Process by Design of
Experimental |
565-207 |
|
S. Nansaarng, K. Chaivanich |
|
|
|
|
|
Potential Danger of Chromium Tanned Wastes |
565-187 |
|
Karel Kolomaznik, Milan Adamek, Michaela Uhlirova |
|
|
|
|
|
Conception and Design of a Thermal Energy Storage
System |
565-181 |
|
R. Adinberg, M. Epstein |
|
|
|
|
|
A New Scalar Reynolds Stress Model for
Non-Isothermal Wall Bounded Turbulent Flows |
565-176 |
|
M. D. El Hayek |
|
|
|
|
|
A Method for Evaluation of Critical Heat Flux
Densities |
565-156 |
|
Nikolai Kobasko |
|
|
|
|
|
Practical Applications of Intensive Quenching
Methods |
565-155 |
|
Michael A. Aronov, Nikolai I. Kobasko, Joseph A.
Powell |
|
|
|
|
|
Study of In–line Tube Bundle Heat Transfer to
Downward Foam Flow |
565-154 |
|
J. Gylys, T. Zdankus, A. Ingilertas, S. Sinkunas,
M. Babilas |
|
|
|
|
|
Numerical Analysis of Density Wave Oscillations in
the Horizontal Parallel Tube Paths of the Evaporator of a Natural
Circulation Heat Recovery Steam Generator |
565-153 |
|
Heimo Walter |
|
|
|
|
|
Solution of Some Problems of Thermodynamical
Systems |
565-145 |
|
Stasys Bockus |
|
|
|
|
|
Submerged Arc Surfacing of Structural Steel using
Metals Powder added to Flux |
565-144 |
|
Petras Ambroza, Regita Bendikiene, Lina
Kavaliauskiene |
|
|
|
|
|
Analysis of Laminar-to-Turbulent Threshold with
Water-gAl2O3
and Ethylene glycol-gAl2O3
Nanofluids in Free Convection |
565-142 |
|
C. V. Popa, S. Fohanno, G. Polidori, C. T. Nguyen |
|
|
|
|
|
Experimental Study of Mixed Convection Laminar Flow
of Water-Al2O3
Nanofluid in Horizontal Tube with Uniform Wall Heat Flux |
565-141 |
|
R. Ben Mansour, N. Galanis, C. T. Nguyen, C. Aouina |
|
|
|
|
|
|
|
|
Applicability of Tri-generation Energy Production
for Air-conditioning Systems in Czech Republic |
565-140 |
|
J. Pospisil, J. Fiedler |
|
|
|
|
|
Free Convection from an Elliptic Tube with its
Major Axis Vertical and Placed in a Micropolar Fluid |
565-123 |
|
F. M. Mahfouz |
|
|
|
|
|
Hysteresis Phenomenon on Water-Based Nanofluid
Viscosity |
565-118 |
|
C. T. Nguyen, F. Desgranges, G. Roy, N. Galanis, T.
Mare |
|
|
|
|
|
Laser Induced Incandescence and Particle Size |
565-114 |
|
Thomas Prevenslik |
|
|
|
|
|
Modeling and Simulation of Thermal Air Circulation
above an Urban-ized Area |
565-111 |
|
A. F. Kurbatsky, L. I. Kurbatskaya |
|
|
|
|
|
Flows in Duct for Axial Fan |
565-260 |
|
Jaewon Kim, E. Y. Ahn |
|
|
|
|
|
GIS Based Decision Support Tool for Remediation
Technology Selection |
565-283 |
|
Jovan Dudukovic, Mladen Stanojevic, Sanja Vranes |
|
|
|
|
|
MZM -16 Oil Cooling Capacity Investigations Based
on Solving Inverse Problem |
565-158 |
|
Nikolai Kobasko, Volodymyr Dobryvechir |
|
|
|
|
|
Optimization of the Finite Volume Method Source
Code by using Polymorphism |
565-174 |
|
Henning Zindler, Reinhard Leithner |
|
|
|
|
|
Laminar Mixed Convection in the Entrance Region of
Horizontal Quarter Circle Ducts |
565-364 |
|
Yousef M. F. El. Hasadi |
|
|
|
|
|
Trend of Standards for Hydrographic Survey |
565-362 |
|
Sorin Dan Grigorescu, Costin Cepisca, Nicolae Jula |
|
|
|
|
|
Pollutant Concentration Profiles in Vehicular Road
Tunnels |
565-296 |
|
K. L. Mak, W. T. Hung |
|
|
|
|
|
Separation of Printed Circuit Board by Temperature
Shock |
565-254 |
|
Dagmar Janacova, Karel Kolomaznik, Vladimir Vasek,
Jiri Krenek, Michaela Uhlirova |
|
|
|
|
|
Heat Transfer in Athletic Shoes during the Running |
565-227 |
|
M. Rebay, A. Arfaoui, A. Leopol, J. Perin, R. Taiar |
|
|
|
|
|
Effect of Horizontal and non Horizontal Heat and
Mass Gradients on Thermosolutal Convection in a Partially Porous
Cavity |
565-221 |
|
Rahli Omar, Bouhadef Khedidja |
|
|
|
|
|
A Survey on Control-Oriented Plasma Physics in
Tokamak Reactors |
565-214 |
|
Aitor J. Garrido, Izaskun Garrido, Oscar Barambones,
Patxi Alkorta |
|
|
|
|
|
New Temperature Dependent Thermal Conductivity Data
of Water Based Nanofluids |
565-198 |
|
Honorine Angue Mintsa, Gilles Roy, Cong Tam Nguyen |
|
|
|
|
|
Initial and Critical Heat Flux Densities Evaluated
on the Basis of CFD Modeling and Experiments during Intensive
Quenching |
565-196 |
|
N. Kobasko, P. Krukovskyi, D. Yurchenko |
|
|
|
|
|
Sliding Pressure Operation of Large Conventional
Steam Power Units |
565-178 |
|
George Darie, Horia Petcu, Gabriel Negreanu, Viorel
Gherghina |
|
|
|
|
|
Water as a Design Material in Nine Plans of Le
Notre; A Topological Study of Relations Between Ensemble, River and
Settlement |
565-258 |
|
Martin van den Toorn |
pp.304-313 |
|
|
|
|
Real Consumption and Numerical Methodologies in
Energy Performance of Buildings |
565-278 |
|
Lamberto Tronchin |
|