The conference will be held in
Acapulco, Mexico,
January 25-27, 2008
International Scientific Committee
HONORARY CHAIR:
Prof. B. Bird, 3004 Engineering Hall,
1415 Engineering Drive, Madison, WI 53706-1691, USA
Prof. E. L. Cussler, Dept. of
Chemical Engineering & Materials Science, University of Minnesota,
Minneapolis, MN 55455, USA
Prof. B. A. Jubran, Department of Aerospace Engineering, Ryerson
University,
350 Victoria Street, Toronto, Ontario, Canada, M5B 2K3
Prof. D. R. Paul,Department of Chemical Engineering and Texas
Materials Institute, The University of Texas at Austin, Austin, TX 78712,
USA
Dr. P. E. Price, 3M, Corporate Process Research Laboratory, 3M Center
Bldg. 518-1-01
St. Paul, MN 55144-1000, USA
Prof. J. S. Vrentas, The Pennsylvania State University, University
Park, PA 16802, USA
Prof. Jurij Krope, University of Maribor, Faculty of
Chemistry & Chemical Engineering SLOVENIA
Prof. Dr.-Ing. F.-K. Benra, Head of
Chair for Turbomachinery, University of Duisburg-Essen, GERMANY
CHAIRMEN:
Prof. Siavash H. Sohrab
Robert R. McCormick School of
Engineering and Applied Science
Department of Mechanical Engineering
Northwestern University, Evanston, Illinois, 60208
http://www.mech.northwestern.edu/dept/people/faculty/sohrab.html
Prof. Haris J. Catrakis
Iracletos Flow Dynamics and Turbulence
Laboratories
Mechanical and Aerospace Engineering
Engineering Gateway 4200
University of California
Irvine, CA 92697, USA
http://flows.eng.uci.edu
Dr.
Nikolai Kobasko,
Director of technology and R&D of “IQ Technologies Inc”, 655 S.
Broadway, Akron, Ohio 44311, USA, Tele/Fax 216.381.8159.
Also President of “Intensive Technologies Ltd”, Kiev, Ukraine.
http://www.intensivequench.com,
http://www.itl.kiev.ua
MEMBERS
(pending confirmation)
Ching-Yang Cheng, TAIWAN
Chin-Hsiang Cheng, TAIWAN
Shyan-fu Chou, TAIWAN
Massimo Corcione, ITALY
Arne Graue, NORWAY
Jonas Gylys, LITHUANIA
Dagmar Janacova, CZECH REPUBLIC
Bjorn Kvamme, NORWAY
Jongsang Park, KOREA
In Hyoung Rhee, KOREA
|
|
